Not sure which cutting table or plasma cutter you need? Complete the questionnaire to find out which products are suitable for your work. With one click of a button, you can then add all the desired items to the shopping cart.
Which plate dimensions do you want to cut maximum ?
Depending on the plate size, we select a suitable cutting table.
Which plate thickness do you want to be able to cut to the maximum ?
If you want to cut ? for several hours in a row, choose some overcapacity by selecting one sheet thickness higher. The plasma cutter becomes warm and needs time to cool down. In this way you are not at the limit of his switch -on time. Note the food! 45A 220V, 75/80A 380V 16A AC, 100A 380V 32A AC. We offer two brands of plasma cutters, Jasic and Pritec. The advantage of a Pritec Plasma cutter is that it can cut consecutive for longer, has a well -arranged LCD screen, the pressure regulator is easy to reach and offers the possibility to cut mesh. The Jasic does not have these options. However, the Jasic is supplied including hand torch. This is optional at the Pritec. All plasma cutters generally require a maximum air consumption of 280 l/min at 5.5 bar.
Do you want an air filter ?
We recommend an air filter when the humidity in the air system is too high. The plasma cutter is equipped with a moisture separator, but in some cases this is not sufficient. Moisture then ends up in the melt bath. This can cause poor cutting quality.
Do you want a stand -up ?
The Acros 80s & 150S are constructed in such a way that a plate to be edited can cross outside the machine dimensions. If you want to edit records that fall in you can apply the stand -up edge. A stand -up edge protects the immediate surroundings of the cutting table against splashes and sparks. *Not to be applied to the Acros 200S.
If you want a starter kit for the Pritec Toorts ? (if you have selected a Jasic at the previous step, continue the next step.)
If you have previously opted for the Spark brand, fill in this question. On the basis of the selected plasma cutter, we choose a corresponding starter kit, which contains all common wear parts and spare parts for a good start.
Do you want a starter kit for the Jasic Toorts ?
If you have chosen a Jasic Plasma Snijder and you want a starter kit, enter this question. On the basis of the selected plasma cutter, we choose a corresponding starter kit, which contains all common wear parts and spare parts for a good start.
Do you want to add plasma fluid ?
We recommend applying Plasma Fluid in the water bowl of the acros. Plasma Fluid considerably extends the life of the machine, because it occurs rust and corrosion. Both on the machine and on the plates that go back into the position.
Choose which Toortsen you want
With the Jasic Plasma cutter, a hand torch is supplied as standard and the machine fever is optional. With the Pritec, both the hand and the machine fever are optional. It is possible to leave the machine fever in the machine and to disconnect the inverter in order to link a hand fever for hand cutting. Select below which options are desirable.
Other items
Other articles that may be desirable: Extra filters for the moisture filter or spare cutting strip. The Acros 80 has 10 cutting strips and the Acros 105S has 22 cutting strips in the water bowl.
