SheetCam

SheetCam It is a widely used program, and there are numerous instructional videos online. SheetCam offers the ability to import a DXF file so that you can draw with any desired CAD software. The program also features a small library of standard workpieces whose dimensions can be adjusted. 

Sheetcam is universal CAM software; a free basic version is available. You can upgrade to a full version without obligation; the costs are then one-time €248,95, - per license (check the official Sheetcam website for current prices).  

To use SheetCam in combination with our machine, you need our post processor. 

What is a Post Processor?

A post-processor is a type of translation file for the CAM software. It specifies which codes apply to which commands, so that the CAM software can translate its language into the language of the respective machine.  

An example: The Mach3 controller on our machines uses code M3 to switch on the torch. The Post Processor then describes M3 as that specific code. The CAM software then knows to enter code M3 when the torch needs to be switched on. If this is M6 on another machine, it will be listed as M6 in the Post Processor. So, the post processor is specific to our machines.    

Download the file from our site and place it in the NC program as follows:

In SheetCam, go to the menu screen at the top. Options -> Machine -> Post Processor

Click on that in the window Import mail and open the post processor that you downloaded from our site.